A Wonderful Choice for Multicolor 3D Printing
Color-boost Your Creative Projects
you are able to print in the splendor of 16 colors*. Saves the need for extra painting afterward.
All the Best While Hands-off
Built-in Sensor to Read Filament Info
Just scan a Creality RFID filament on the right side of the printer base,
and the built-in sensor will automatically identify its color and type.
It will remind you when there is a conflict between the slicing info and the actual filament in use.
Auto Bed Leveling &
X-axis Tilt Reduction
A good first layer is a nice print half done. Creality Hi,
with a comprehensive and precise auto-leveling system,
grants you the perfect first layer every time.
Dual Lead Screws
High-sensitivity Sensor
1000W Heatbed
Two independently motorized lead screws
adjust the X-axis to the horizontal position.
A strain gauge in the toolhead auto-probes
the bed for an accurate leveling mesh.
A 1000W AC heatbed that can reach 60 ℃ in 30s*
or 100 ℃ in 90s*, reducing the preparation tim
Smooth Filament In/Out
by Touch Control
Filament load & unload now gets even easier
with the CFS in play. Simply insert the filament
into the feeding tube, and then give
a few quick touches.
Distinct Sounds to
Keep You Informed
The built-in buzzer will give off corresponding
sounds when the print task is finished
or paused unexpectedly.
No need for your constant attention.
Easy from Assembly
to First Print
Assembly Gets Even Easier
Fold-away 3.2" Touch Screen
Helpful Boot-up Quick Guide
Creality Hi is 95% pre-assembled.
You can get it going in just 8 minutes after tightening only seven screws and some wiring.
It's the most user-friendly bed slinger Creality has
ever offered.
Camera with a
Privacy Cap
· Video monitoring of your print jobs
· One tap to share time-lapse video
· Camera cap for privacy protection
A Much Quieter Experience
The operating noise has been tempered by the dynamically balanced fans, the frictionless linear rail, and the smooth linear rods. So you get more tranquility.
· Silent Mode: ≤ 48 dB*
As Steady
as It Is Stylish
Creality Hi features an all-metal body with unibody
parts die-cast out of aluminum alloy.
It looks stylish and ensures minimal shaking.
The printer also gets a linear rail on the X-axis
and two linear rods on the Y-axis.
The rigid structure and smooth motion
will elevate the print quality considerably.
Active Input Shaping
Creality Hi owns a proprietary algorithm that can analyze the amplitude of vibrations at different print speeds
and generate opposite signals to cancel out the vibrations actively. So, you will get faster prints, less ringing, and smoother surfaces.
Marvelous RFID-tagged Filament
Creality RFID filament is the perfect match with CFS. The included RFID chip carries filament type, color and other info that can be read by the CFS. Therefore, it enables intelligent filament management which is key to multicolor tasks.
