Liquid Silicone Rubber SANAAA for Mould Making – Shore 10A Hardness -Not Food Grade-

This item is not available for store pick up

Create flexible, reusable moulds for your DIY and casting projects with SANAAA Liquid Silicone Rubber. This two-part silicone kit is mixed in equal amounts by weight and cures at room temperature to form a soft, flexible mould.

Use it to make moulds for resin, candles, wax, soap, and decorative casting projects. Its beginner-friendly mixing process makes it a practical choice for hobbyists, makers, and craft workshops.

Key features

• Soft 10A hardness for flexible moulds
• 640 g kit containing Part A (320g) and Part B (320g)
• Mixing ratio: 1:1 by weight
• Suitable for resin, candle, wax, soap, and decorative casting moulds
• Advertised room-temperature curing time: approximately 6–12 hours, depending on mould size and thickness
• Manufacturer states that bubbles can dissipate naturally; a vacuum chamber may not be required

How to use

1. Weigh equal amounts of Part A and Part B.
2. Combine and mix thoroughly for about five minutes, scraping the sides and bottom of the container.
3. Pour into your prepared mould box and leave undisturbed to cure at room temperature.
4. Allow the silicone to cure fully before demoulding.

Note: Follow the product packaging for handling, curing, and safety instructions. Food-contact suitability is NOT confirmed; do not use for food moulds unless the manufacturer confirms it is food-safe.