Supports Multi-Color Printing with Up to 16 Colors Using 4 CFS
Direct Drive Extruder
Tilt Detection
FOC Closed-Loop Motors
350*350*350mm Build Volume
Active Chamber Heater
4*500g filaments in the box
350*350*350mm build volume; 600mm/s max speed,30000mm/s² max acceleration; nozzle temperature up to 350℃; heatbed temperature up to 120℃. chamber temperature up to 60℃.
CFS is actually an intelligent filament management system. It enables automatic filament loading and unloading in addition to multi-color 3D printing. So, it can save you the troubles of filament replacement. And when the filament backup function is on, if the current filament spool is running out, it can continue by selecting and loading another spool automatically.It also makes a well-sealed drying box that you can store filaments for a long time.
K2 Plus uses two optical distance sensors on Z-axis for auto tilt adjustment and a strain guage in the printhead for auto leveling. So it can ensure accurate leveling with less compensation. The whole process is automated without your attention. Moreover,the aluminum heatbed is 5mm thick and hard to deform, so the leveling accuracy can be well guaranteed.
The K2 Plus heatbed adopts an 800W high-power AC heating system with double safeguards. For one, there is an overheating fuse under the heatbed which will automatically disconnect in overheating. There is also a fuse in the machine body. When an unexpected situation occurs, it will disconnect to ensure safety.
CFS can use any flament spools with a diameter of 197-202mm. Creality paper spools are compatible. CFS supports most filaments such as PLA/PETG /ABS/ASA/PA-CF, but not with flexible filaments such as TPU and damp PVA/BVOH.
CFS does not support TPU. To print with TPU, you can install it on the standard spool holder of K2 Plus.
K2 Plus has two cameras. One is located close to the nozzle. It is used for flow rate and PA(Pressure Advance)calibration. Another is attached to the front frame. It is used for video monitoring and print failure detection.
FOC Closed-Loop Motors
Tilt
Detection
Detection
Active Chamber Heater
Direct Drive Extruder
350*350*350mm
Build Volume
Build Volume
